Besdata Technology Company Limited
We Have Better Solutions For Biopotential Recordings
Add to Cart
For use in neuromonitoring procedures in conjunction with electrodes.Use a bell shaped cup electrode with the hole in the center.Apply just enough paste inside of the EEG electrode to very slightly overfill the cup. Place the electrode onto the electrode site and press with medium pressure. A small amount of paste may come out the hole.Pressing too hard will cause all of the paste to come out and electrode will not adhere well. Clean with warm water.
Directions:
Store the paste in a cool place away from direct sunlight. Tighten the cap to prevent paste from drying. Do not use dried paste because the EEG waveform cannot be recorded.
| Name | Model number | Specification | Pack(PU) |
| skin prepare gel | BD-P1 | 4oz/124g | 1 pc |
| skin prepare gel | BD-P2 | 500g | 1 pc |
| conductive gel | BD-C1 | 500g | 1 pc |
| conductive gel | BD-C2 | 1000g | 1 pc |
| conductive paste | BD-P8 | 250g | 1 pc |
